www.electronics-usa.com
19
'26
Written on Modified on
Placement Platform Variant Adds 120 Feeder Slots and 55 mm Component Height
ASMPT SMT Solutions extends its SIPLACE V platform with the SIPLACE V L, adding material supply capacity and a wider component spectrum on one architecture.
smt.asmpt.com

With 120 feeder slots, the SIPLACE V L combines the high real performance of the SIPLACE V platform with additional material supply capacities. (Image source: ASMPT)
ASMPT SMT Solutions has expanded its SIPLACE V placement platform with the SIPLACE V L variant, which adds feeder slots, a compact interchangeable Tray Unit SIPLACE V and the ability to handle taller components. The new variant is based on the same modular platform architecture as the SIPLACE V, so that line configurations can be matched to product mix and production requirements while remaining on one technology platform.
Modular platform architecture for different line concepts
The SIPLACE V platform delivers performance improvements of up to 30 percent under real production conditions, depending on the application. Contributing factors include a newly developed super-stiff machine frame, short travel paths and main-axis accelerations of up to 6 G. Rather than developing machines for specific applications, ASMPT based the platform on a modular toolbox that supports different configurations according to product mix, performance requirements and production environment, with the SIPLACE V and SIPLACE V L as model variants.
120 feeder slots and compact tray supply
The SIPLACE V L provides 120 feeder slots, 30 more than the SIPLACE V, so that extensive component ranges can remain on the machine in high-mix environments with frequent product changes. The additional slots increase line configuration flexibility and can help reduce setup costs. For tray-fed components, a feeder table and a Tray Unit SIPLACE V can be combined on each side of the machine. The interchangeable Tray Unit is significantly narrower than previous solutions, allowing feeder and tray supply at high speed within a compact footprint.
Component spectrum from 016008M parts to 55 mm height
The SIPLACE V L processes components up to 55 mm high, including demanding odd-shaped parts. Across the platform, the component range extends from 016008M parts to large and heavy components. The CP20 collect-and-place head places up to 52,500 components per hour with an accuracy of ±25 µm @ 3σ, while the CPP head switches between collect-and-place, pick-and-place and mixed modes via software commands. For components measuring up to 200 × 150 × 55 mm, the TWIN VHF head applies a placement force of up to 100 N.
Compatibility and line communication
Existing SIPLACE X-Feeders and SIPLACE SX changeover tables can continue to be used, as can the applications of the WORKS Software Suite and ASMPT Factory Solutions. Gigabit Ethernet and free-space optical communication support the fast exchange of large data volumes and provide a basis for further automation and AI-based applications, while standardised interfaces such as IPC-HERMES-9852 and IPC-CFX connect the SMT line to higher-level software systems.
“With the SIPLACE V we have created a platform that is flexibly expandable. The SIPLACE V L represents the next step. It features more feeder slots, more material supply options, and an expanded component spectrum. It allows us and our customers to put together the line configuration that best suits their products and their production requirements while remaining on the same technology platform,” explains Sven Buchholz, VP Product & Product Portfolio Management at ASMPT SMT Solutions.
Additional Context
This section details technical specifications and competitive benchmarking not included in the original news release.
Among comparable modular placement platforms, Yamaha’s YRM20 handles up to 128 component types (converted to 8 mm tape feeders) and, with its FM head for odd-shaped components, places parts up to 30 mm high and up to 55 × 100 mm in size. The SIPLACE V L provides 120 feeder slots and processes components up to 55 mm high, with its TWIN VHF head handling parts measuring up to 200 × 150 × 55 mm.
Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.
ASMPT SMT Solutions has expanded its SIPLACE V placement platform with the SIPLACE V L variant, which adds feeder slots, a compact interchangeable Tray Unit SIPLACE V and the ability to handle taller components. The new variant is based on the same modular platform architecture as the SIPLACE V, so that line configurations can be matched to product mix and production requirements while remaining on one technology platform.
Modular platform architecture for different line concepts
The SIPLACE V platform delivers performance improvements of up to 30 percent under real production conditions, depending on the application. Contributing factors include a newly developed super-stiff machine frame, short travel paths and main-axis accelerations of up to 6 G. Rather than developing machines for specific applications, ASMPT based the platform on a modular toolbox that supports different configurations according to product mix, performance requirements and production environment, with the SIPLACE V and SIPLACE V L as model variants.
120 feeder slots and compact tray supply
The SIPLACE V L provides 120 feeder slots, 30 more than the SIPLACE V, so that extensive component ranges can remain on the machine in high-mix environments with frequent product changes. The additional slots increase line configuration flexibility and can help reduce setup costs. For tray-fed components, a feeder table and a Tray Unit SIPLACE V can be combined on each side of the machine. The interchangeable Tray Unit is significantly narrower than previous solutions, allowing feeder and tray supply at high speed within a compact footprint.
Component spectrum from 016008M parts to 55 mm height
The SIPLACE V L processes components up to 55 mm high, including demanding odd-shaped parts. Across the platform, the component range extends from 016008M parts to large and heavy components. The CP20 collect-and-place head places up to 52,500 components per hour with an accuracy of ±25 µm @ 3σ, while the CPP head switches between collect-and-place, pick-and-place and mixed modes via software commands. For components measuring up to 200 × 150 × 55 mm, the TWIN VHF head applies a placement force of up to 100 N.
Compatibility and line communication
Existing SIPLACE X-Feeders and SIPLACE SX changeover tables can continue to be used, as can the applications of the WORKS Software Suite and ASMPT Factory Solutions. Gigabit Ethernet and free-space optical communication support the fast exchange of large data volumes and provide a basis for further automation and AI-based applications, while standardised interfaces such as IPC-HERMES-9852 and IPC-CFX connect the SMT line to higher-level software systems.
“With the SIPLACE V we have created a platform that is flexibly expandable. The SIPLACE V L represents the next step. It features more feeder slots, more material supply options, and an expanded component spectrum. It allows us and our customers to put together the line configuration that best suits their products and their production requirements while remaining on the same technology platform,” explains Sven Buchholz, VP Product & Product Portfolio Management at ASMPT SMT Solutions.
Additional Context
This section details technical specifications and competitive benchmarking not included in the original news release.
Among comparable modular placement platforms, Yamaha’s YRM20 handles up to 128 component types (converted to 8 mm tape feeders) and, with its FM head for odd-shaped components, places parts up to 30 mm high and up to 55 × 100 mm in size. The SIPLACE V L provides 120 feeder slots and processes components up to 55 mm high, with its TWIN VHF head handling parts measuring up to 200 × 150 × 55 mm.
Edited by Aishwarya Mambet, Induportals Editor, with AI assistance.
www.asmpt.com

